U.S. Bullet Proofing

U.S. BULLET PROOFING

USAW 200 Bullet Resistant Sliding Aluminum Window

The USAW 200 Series interior bullet resistant window system is a back-glazed operable aluminum window designed for bullet and blast resistance. This window is ideal for applications that desire to retain a building’s exterior appearance, when only certain portions of a building require protection and are operable window to serve as an emergency egress. These bullet resistant glass windows provide enhanced security for your property without drawing undue attention to themselves. Our range of bullet resistant windows are certified to protect against ballistics as well as forced entry attempts and explosions. These qualities make them ideal for safeguarding banks, government buildings, schools and other high-risk properties. The USAW 200 window has been tested to standards and any further information should be requested from USBP.

SAVE FOR LATER ADD TO COMPARE
FEATURES
Windows System Type

Single Hung,Casement
Threat Type

Ballistic Resistant Windows,Blast Resistant Windows,Forced Entry Windows,FE/BR Windows
Ballistics Rating

UL 752 Level 1,UL 752 Level 2,UL 752 Level 3,UL 752 Level 4,UL 752 Level 5,UL 752 Level 6,UL 752 Level 7,UL 752 Level 8,NIJ 0108-01 Level I,NIJ 0108-01 Level II/IIa,NIJ 0108-01 Level III/IIIa
Blast Response

ASCE 59-11 - Very Low LOP,ASCE 59-11 - Low LOP,ASCE 59-11 - Medium LOP,ASCE 59-11 - High LOP,GSA/ISC LOP Level I,GSA/ISC LOP Level II,GSA/ISC LOP Level III,GSA/ISC LOP Level IV,GSA/ISC LOP Level V,CSA S850-12 - Very Low LOP,CSA S850-12 - Low LOP,CSA S850-12 - Medium LOP,CSA S850-12 - High LOP,UFC 4-010-01 - Very Low LOP,UFC 4-010-01 - Low LOP,UFC 4-010-01 - Medium LOP,UFC 4-010-01 - High LOP,UFC 3-340-02 - Protection Category 2,UFC 3-340-02 - Protection Category 3,UFC 3-340-02 - Protection Category 4,PDC-TR 06-08 - Very Low LOP,PDC-TR 06-08 - Low LOP,PDC-TR 06-08 - Medium LOP,PDC-TR 06-08 - High LOP
Thermal Break

No
Frame Material

Aluminum
Estimated Lead Time (does not include shipping)

10 - 12 week(s)
Warranty
1 year
All necessary replacement of parts and adjustments not occasioned by accident or misuse shall be made at the vendor’s expense when notified within 30 days after customer receipt of product. All products are warranted for a period of one year from the date of customer receipt. During warranty period, all defects not caused by attack, accident or misuse through fault or negligence by the customer shall be adjusted or replaced at the vendor’s expense (excluding transportation costs).
US REGIONS/COUNTRIES AVAILABLE
  • Canada
  • United States of America
  • Worldwide
DOWNLOADS
Documentation
Brochure Files
USBP_Brochure.pdf
424.61 KB
download Download
USBP_USAW200_Cut_Sheet.pdf
148.75 KB
download Download
Specification files
USBP_USAW200_Specifications.pdf
108.28 KB
download Download
Drawing files
USBP_U200-RHR-L3.dwg
63.93 KB
download Download
USBP_USAW200-Anodized-Angle
arrow
arrow