Armortex Hollow Metal Window, Operable

Hollow Metal Window - Operable

Bullet Resistant Hollow Metal Window Frames are designed for “non-ricochet type” intended to permit capture and retention of attacking projectile, lessening potential of random injury or lateral penetration. Framing system uses cold rolled steel prime painted or stainless steel cut, broken and welded to size which include armor to meet protection level required. Interior screw applied stops, making glazing installation easy for variety of glazing types and thickness to provide security level needed. Transaction windows can come with natural voice which allows voice transmission around glazing through the frame or NO natural voice to include electronic or passive speakers. Transaction windows are also available with a laminate, stainless steel counters or can be made to install on existing counters.

FEATURES

Windows System Type

Casement

Threat Type

Ballistic Resistant Windows

Ballistics Rating

UL 752 Level 1,UL 752 Level 2,UL 752 Level 3,UL 752 Level 4,UL 752 Level 5,UL 752 Level 6,UL 752 Level 7,UL 752 Level 8,UL 752 Level 9,UL 752 Level 10

Window Width

Up to 96 in

Window Height

Up to 96 in

Thermal Break

Frame Material

Steel

Estimated Lead Time (does not include shipping)

10 - 12 week(s)

Certified/Trained Installers Available

Warranty

1 year

"Armortex warrants its ARMORTEX products for a period of twelve months (1 year) from date of shipment against defects in materials and workmanship. Such warranty is made only to those who purchase these products directly from Armortex. Armortex products are designed for installation by persons having requisite skill and knowledge and at their own discretion and risk. Liability under this warranty is limited to either replacement of product, excluding cost of installation, or at Armortex’s option to refund Armortex’s invoice price. In as much as Armortex has no control over the use to which others may put any material or product, it does not guarantee that the same results as those described in catalogue and or drawings will be obtained. Each user of the material or designer or both should make his own tests to determine the suitability of the material for his own particular uses. ARMORTEX® is a registered trademark. As built drawings, operation manual, and spare parts data are not applicable to our products."

US REGIONS/COUNTRIES AVAILABLE