Level 7 Panels block against 5.56mm rifle full metal copper jacket, with lead core rounds. It is tested with 5 shots per panel. Weighs in at 11.7psf. This panel is 1 1/8” thick. This is a part of the more robust protection. The panels are made of multiple layers of woven roving ballistic grade fiberglass cloth impregnated with a thermoset polyester resin and compressed into flat rigid sheets. The production technique and materials used provide the controlled internal delamination to permit the capture of a penetrating projectile. Our fiberglass panels are easy to install, effective against forced entry, low wicking and non-toxic.
ArmorCore® product line has become the preferred bullet resistant fiberglass panel is our commitment to not use starch-oil fiberglass, which is organic and tends to break down in time.
Waco Composites manufactures ballistic panel sizes that range from 3′ x 8′ all the way to 5′ x 10′.
Wall Systems Type
Shield Wall/Barrier System
UL 752 Level 7
Forced Entry (UL 972)
ASTM F1233 Class IV,ASTM F1233 Class V
Safety Act Certified
Complex Configurations,High/Long-Span Wall System,Fire-Rated,Peel Ply can be added to one side for easier painting.
Estimated Lead Time (does not include shipping)
This warranty statement is issued to the original purchaser and applies only to ArmorCore Bullet Resistant Fiberglass Panels which have been used for their intended purpose, within designed capacities and not subject to abuse, misuse, and/or improper installation. All ArmorCore Materials and workmanship shall be warranted against defects for a period of ten (10) years from the date of substantial completion. We will repair or replace ArmorCore Panels at our discretion, found upon our inspection, to be defective in material or our workmanship for up to ten (10) years from the date of substantial completion. (For every Level)
US REGIONS/COUNTRIES AVAILABLE