Bullet Resistant Fiberglass Panels UL Level 1

UL752 certified Level 1 panels are most commonly used for protection against hand guns of medium power, such as the 9mm, Super 38 Automatic, and the like, with muzzle energy of 380-460 foot-pounds (515-624J). Level 1 is 1/4" thick and weighs 2.6 lbs per sq. ft. ArmorCore panels are made of multiple layers of woven-roving fiberglass impregnated with a thermoset polyester resin and compressed into flat rigid sheets. The production technique and materials used provide the controlled internal delamination to permit the capture of a penetrating projectile. ArmorCore fiberglass panels are easy to install, non-ricochet, effective against forced entry, storm resistant, low wicking, 1-hour fire rated and non-toxic. Waco Composites has been the direct manufacturer of ArmorCore bullet resistant fiberglass since 1996 and is an ISO Registered 9001:2015 company. We offer a variety of standard size sheets: 3’, 4’ & 5’ widths by 8’, 9’ & 10’ lengths along with custom cutting to any 2-dimensional size.

FEATURES

Wall Systems Type

Shield Wall/Barrier System,Building Interior Wall System

Ballistics Rating

UL 752 Level 1

Forced Entry (UL 972)

ASTM F1233 Class I,ASTM F1233 Class II,ASTM F1233 Class III

Safety Act Certified

Not Certified

Wall Height

8 - 10 Ft

Wall Depth

0.25 In

Structural Composition

FRP,Composite

Available Features

Complex Configurations,High/Long-Span Wall System,Fire-Rated,Peel Ply can be added to one side for easier painting.

Estimated Lead Time (does not include shipping)

2 week(s)

Warranty

10 years

This warranty statement is issued to the original purchaser and applies only to ArmorCore Bullet Resistant Fiberglass Panels which have been used for their intended purpose, within designed capacities and not subject to abuse, misuse, and/or improper installation. All ArmorCore Materials and workmanship shall be warranted against defects for a period of ten (10) years from the date of substantial completion. We will repair or replace ArmorCore Panels at our discretion, found upon our inspection, to be defective in material or our workmanship for up to ten (10) years from the date of substantial completion. (For every Level)

US REGIONS/COUNTRIES AVAILABLE