A vertical lift gate is similar to vertical pivot gate in that the entire barrier lifts off the ground. While a vertical pivot gate lifts the entire panel 90-degrees like a railroad crossing arm or vehicle barrier drop arm, a vertical lift gate elevates the gate in its horizontal position, lifting it overhead so a truck or other vehicle can pass underneath it.
Unlike slide or rolling gates, vertical lift gates control access in a very space efficient manner. Because the gate elevates overhead, there is no interaction with pedestrians and no interference with the roadway entry space during operation. Because the gate is lifted off the ground, it also doesn’t require the kind of ground preparation that a rolling gate needs and can be used on sloped terrain.
Vertical lift gates also open and close quicker than rolling gates that by design must travel across the entire distance of the roadway entrance to permit vehicle entry. Heavy-use sites where there is a lot of vehicular traffic in and out can benefit from the faster operation times offered by a vertical lift gate.
It is typically more expensive to install a vertical lift gate than a swing or rolling gate. In addition, maintaining the gate so it works properly and safely without malfunction should always be considered when budgeting.
Aluminum, steel, iron and composites are the most commonly used materials.
Vertical pivot gates are frequently deployed at heavy-use, high traffic volume sites where space is limited for entry and exit. They are also especially good for providing access control for larger, taller vehicles. Potential locations include:
Many vertical lift gates are anti-ram rated and thus fall under the testing requirements of ASTM F2656. Some use the DoD’s K-rating standard. To find a DoD-approved vertical lift gate, use Protogetic’s groundbreaking 100% digital DoD Anti-Ram Vehicle Barrier list.
Non-crash rating standards for vertical lift gates are the same as vertical pivot gates, including:
Because many vertical lift gates are quite heavy, hydraulic operation is common. Lighter lift gates can employ electric chain drives to raise and lower the gate. Often vertical lift gates are combined with access control products such as license plate scanners or car key readers to automatically open the gate without the need for human personnel.
No. Protogetic represents the top manufacturers of vertical lift gates and other high security products like penetration resistant fences or anti-ram vehicle barriers. Our advanced search filter turns hours of searching into instantaneous results so you can get more work done - faster!
Please provide the following information so that your inquiry can be processed. The Protogetic team representative will be notified.By submitting this form, you agree to share the above information with the manufacturer. Protogetic does not sell user data.