Search for Protective Products
    Choose product type

    Shop Fences

    The Protogetic Filter
    CLEAR ALL (0)
    Fence Type
    0 Ft
    120 Ft
    In-Fill Material
    Security Options
    Foundation Type
    Foundation Depth
    0 in
    120 in
    Tested or Engineered
    DoD Certified
    Safety Act
    Lead Time
    1 week(s)
    16 week(s)
    Countries Available

    Anti-Ram Vehicle Barrier Fences


    What is an anti-ram vehicle barrier fence?


    An anti-ram vehicle barrier fence, also known as an anti-ram fence, is commonly installed on sites requiring more protection than a typical chain link barrier can provide. These high-security fences are specifically designed and tested to prevent Hostile Vehicle Attacks (HVA) and Vehicle Borne Improvised Explosive Device (VBIED).


    Anti-ram fencing can provide perimeter security against vehicle-borne assaults around an entire building, commercial facility, airport, correctional facility or military base. These anti-ram fence barrier systems provide a high level of protection for personnel, buildings, equipment, and hazardous materials that could be vulnerable to high-speed collisions, whether deliberate or accidental.


    How Does a Vehicle Barrier Fence Work?


    Many commercial sites, industrial and chemical plants, oil refineries and government locations are surrounded by high-security road barrier fences. Chain link fencing using standard 2 3/8ths inch diameter posts is simply not strong enough to stop penetration from a 50 mph truck loaded with explosives. Much stronger construction materials, utilizing high-level engineering, are required for anti-ram vehicle barrier fence border protection. Once designed and manufactured, expensive, live crash tests at certified testing labs must be conducted.


    What is a vehicle barrier anti-ram K-rating?


    There are several ratings test standards which can sometimes be confusing. In 1985, the Department of State (DOS) created K-ratings. They were later revised in 2003. A K-rating measures how far the front bumper of a standard 15,000-pound truck penetrates a vehicle barrier or barrier fence. In order to receive a K-rating, this distance must be less than 50-feet. 


    For instance, a K-rated fence system’s stopping power is tested by crashing a 15,000-pound vehicle into the fence at a specific speed. How fast it is traveling will designate its K rating:


    • K4 - 30 miles per hour 
    • K8 - 40 miles per hour
    • K12 – 50 miles per hour


    The measured penetration distance is then designated by L1, L2 or L3. Each represents a specific incursion range:


    • L3 = less than 3.3 feet. 
    • L2 = 3.3 – 20 feet. 
    • L1 = 20 - 50 feet.


    So a “K8L3” means the truck was traveling 40mph and was stopped with less than 3 feet of penetration.


    What is an ASTM F2656 anti-ram crash rating?


    ASTM International, formerly the American Society for Testing and Materials (ASTM), developed a newer rating called ASTM F2656 that currently is more widely used than K-ratings. Like K-ratings, ASTM F2656 also incorporates size of vehicle (15,000 lb.truck) and its traveling speed. M ratings share similarity to K ratings in that each tests standardized speeds of 30, 40 or 50 mph. For example, a vehicle barrier fence could have the following designations:


    • M30 classification - A vehicle barrier fence rated for a 30 mph impact.
    • M40 classification - A vehicle barrier fence rated for a 40 mph impact.
    • M50 classification - A vehicle barrier fence rated for a 50 mph impact.


    As always with ratings, penetration distance is key. Instead of an “L”, ASTM F2656 ratings use a “P” designation that indicates how far the motor vehicle penetrates the barrier. P ratings range from P1 to P4. Using the vehicle barrier fence example, these are the possible designations for penetration distance:


    • P1 - The vehicle moves no more than 1 meter (3.3 feet) past the vehicle barrier fence.
    • P2 - The vehicle moves no more than 1.01 to 7 meters (3.31 feet to 23 feet) past the vehicle barrier fence.
    • P3 - The vehicle moves no more than 7.01 to 30 meters (23.1 feet to 98.4 feet) past the vehicle barrier fence.
    • P4 - The vehicle moves further than 30 meters (98.41 feet) past the vehicle barrier fence.


    In summary, a M50 P1 rating translates to a 15,000 lb. truck traveling 50 mph being stopped by a vehicle barrier or anti-ram fence with less than 3.3 feet of penetration. It is imporant to note that unlike K-ratings, ASTM has no penetration distance limitation. P4 means that the penetration measurement exceeded 98.41 feet. Because of P4's "unlimited" distance, virtually any tested product can earn a P4 rating. For this reason, DoD only accepts ratings P1-P3. 


    Are ASTM F2656 ratings better than K-ratings?


    ASTM ratings are valuable because they can also test a wider range of vehicle sizes. This is vitally important as hostile vehicle attacks increase using different types of transports to deliver destruction. 


    C-ratings designate a small Car (2430 lbs.)

    PU-ratings designate a Pickup truck (5070 lbs.)

    H-ratings designate a heavy vehicle (65,000 lbs.)


    What is a PAS 68 rating?


    Created by the British Standards Institution (BSI), many international organizations use PAS standards. A PAS68 rating can be intimidating due to its lengthy, Algebraic-looking formula that represents multiple factors, including weight and type of the vehicle, speed, angle of impact, penetration distance and debris dispersion. PAS68 ratings are similar to ASTM and K-ratings in that they are a measurement of protection against higher speed vehicles (30, 40 or 50 mph). A PAS68 rating looks like a math formula from high school: V/7500 [N1]/48/90:0/0 – it might look a bit daunting so let’s break it down.


    V stands for Vehicle test

    3,500(N2) = weight and vehicle type

    48 = speed (48 kph or 29.83 mph)

    90 = angle of impact in degrees

    0 = penetration distance

    0 = how far major debris traveled after impact 


    Check this link for more information about ratings and a deeper dive into PAS68


    Custom Vehicle Barrier Fences


    Whether because of a heightened danger from a Hostile Vehicle Attack or the premises stores expensive goods, volatile materials or data-sensitive information, a crash-rated, high security fence is a critical asset for any business or company that requires robust perimeter protection. Protogetic offers top of the line fence systems from the most reputable manufacturers. Many of these products can be customized to meet your project’s specific design requirements. To instantly find the best vehicle barrier fence for your project, use our proprietary fence filter that allows you to research by manufacturer, anti-ram rating and infill material to name a few.


    Protogetic Offers Premier Vehicle Barrier Fences


    Protogetic’s exclusive high security, anti-ram fence catalog can supply you with a vehicle barrier fence, beam fence or other vehicle barricades tailored to your project’s security requirements. We also offer the highest quality vehicle barrier gates to pair with your high-security fence perimeter specifications. 


    Set up your user account now with a simple email address and get instantaneous, direct access to the world’s leading high security products. Technical specs and information as well as anti-ram certifications are all viewable and downloadable as PDFs. Click one button and you can directly receive real time information and pricing from the manufacturer’s vendor representatives. Finding anti-ram fencing and high-security vehicle barrier products has never been faster or easier. Visit Protogetic today!