Search

    Armortex

    ARMORTEX

    Wood Door - Slim Lite

    Bullet Resistant Wood Veneered door and hollow metal frame assemblies are designed for “non-ricochet type” intended to permit capture and retention of attacking projectile, lessening the potential of random injury or lateral penetration. The frame is built with cold rolled steel prime painted steel which is cut, then broken, and welded to size. Frames include armor installed in 2″ face to meet ballistic protection level. Our doors have fiberglass armor core with particle board and are veneer including door skins and edge molding. Ballistic level 1 thru 3 are 1 3/4″ thick and ballistic level 4 through 8 are 2″ + thick. Our wood door assembly leaves the factory swinging on its frame using heavy duty clear anodized aluminum continuous gear hinge prepped for cylinder, mortise lockset, or exit device.

    SAVE FOR LATER ADD TO COMPARE
    FEATURES
    Door Types

    Single Leaf
    Threat Types

    Ballistic Resistant Doors
    Anti-Ram Rating

    None
    Ballistics Rating

    UL 752 Level 1,UL 752 Level 2,UL 752 Level 3,UL 752 Level 4,UL 752 Level 5,UL 752 Level 6,UL 752 Level 7,UL 752 Level 8
    Tornado (ICC 500)

    No
    Hurricane/Impact

    No
    Door Configurations

    Narrow Lite
    Door Options

    Gun Ports
    Door Opening Height

    80 - 108 in
    Door Opening Width

    32 - 48 in
    Operation Type

    Manual
    Frame Material

    Steel
    Estimated Lead Time (does not include shipping)

    10 - 12 week(s)
    Warranty
    1 year
    Armortex warrants its ARMORTEX products for a period of twelve months (1 year) from date of shipment against defects in materials and workmanship. Such warranty is made only to those who purchase these products directly from Armortex. Armortex products are designed for installation by persons having requisite skill and knowledge and at their own discretion and risk. Liability under this warranty is limited to either replacement of product, excluding cost of installation, or at Armortex’s option to refund Armortex’s invoice price. In as much as Armortex has no control over the use to which others may put any material or product, it does not guarantee that the same results as those described in catalogue and or drawings will be obtained. Each user of the material or designer or both should make his own tests to determine the suitability of the material for his own particular uses. ARMORTEX® is a registered trademark. As built drawings, operation manual, and spare parts data are not applicable to our products.
    US REGIONS/COUNTRIES AVAILABLE
    • United States of America
    DOWNLOADS
    Documentation
    Specification files
    Armortex_BR_Wood_Door_Slim_Lite_Specification.docx
    29.26 KB
    download Download
    Installation files
    Armortex_BR_Wood_Door_Slim_Lite_Installation.pdf
    435.75 KB
    download Download
    Drawing files
    Armortex_BR_Wood_Door_Slim_Lite_Drawing.pdf
    174.47 KB
    download Download
    Armortex_BR_Wood_Door_Slim_Lite_Drawing.dwg
    317.54 KB
    download Download
    Armortex_BR_Wood_Door_Slim_Lite_-_1
    Armortex_BR_Wood_Door_Slim_Lite_-_2
    arrow
    arrow