Bullet Resistant Wood Veneered door and hollow metal frame assemblies are designed for “non-ricochet type” intended to permit capture and retention of attacking projectile, lessening the potential of random injury or lateral penetration. The frame is built with cold rolled steel prime painted steel which is cut, then broken, and welded to size. Frames include armor installed in 2″ face to meet ballistic protection level. Our doors have fiberglass armor core with particle board and are veneer including door skins and edge molding. Ballistic level 1 thru 3 are 1 3/4″ thick and ballistic level 4 through 8 are 2″ + thick. Our wood door assembly leaves the factory swinging on its frame using heavy duty clear anodized aluminum continuous gear hinge prepped for cylinder, mortise lockset, or exit device.
FEATURES
Threat Types
Ballistic Resistant
Ballistics Rating
UL 752 Level 1,UL 752 Level 2,UL 752 Level 3,UL 752 Level 4,UL 752 Level 5,UL 752 Level 6,UL 752 Level 7,UL 752 Level 8
Door Configurations
Opaque
Door Opening Height
80 - 108
in
Door Opening Width
32 - 48
in
Estimated Lead Time (does not include shipping)
10 - 12
week(s)
Warranty
1 year
Armortex warrants its ARMORTEX products for a period of twelve months (1 year) from date of shipment against defects in materials and workmanship. Such warranty is made only to those who purchase these products directly from Armortex.
Armortex products are designed for installation by persons having requisite skill and knowledge and at their own discretion and risk. Liability under this warranty is limited to either replacement of product, excluding cost of installation, or at Armortex’s option to refund Armortex’s invoice price.
In as much as Armortex has no control over the use to which others may put any material or product, it does not guarantee that the same results as those described in catalogue and or drawings will be obtained. Each user of the material or designer or both should make his own tests to determine the suitability of the material for his own particular uses.
ARMORTEX® is a registered trademark. As built drawings, operation manual, and spare parts data are not applicable to our products.
US REGIONS/COUNTRIES AVAILABLE