Metal Door - Full Lite

Bullet Resistant Hollow Metal door and frame assemblies are designed of “non-ricochet type” intended to permit capture and retention of attacking projectile, lessening potential of random injury or lateral penetration. Frame uses cold rolled steel prime painted steel which is cut then broken and welded to size. Frames includes armor installed in 2″ face to meet ballistic protection level. Door uses cold rolled steel prime painted steel skins with channel supported edges with ballistic armor and foam insulation inserted to meet ballistic protection level required. Assembly leaves factory swinging on frame using heavy duty clear anodized aluminum continuous gear hinge prepped for cylinder, mortise lockset or exit device.

FEATURES

Door Types

Single Leaf

Threat Types

Ballistic Resistant Doors

Anti-Ram Rating

None

Ballistics Rating

UL 752 Level 1,UL 752 Level 2,UL 752 Level 3,UL 752 Level 4,UL 752 Level 5,UL 752 Level 6,UL 752 Level 7,UL 752 Level 8

Tornado (ICC 500)

Hurricane/Impact

Door Configurations

Full Vision

Door Options

Gun Ports

Door Opening Height

80 - 108 in

Door Opening Width

32 - 48 in

Operation Type

Manual

Frame Material

Steel

Estimated Lead Time (does not include shipping)

10 - 12 week(s)

Warranty

1 year

Armortex warrants its ARMORTEX products for a period of twelve months (1 year) from date of shipment against defects in materials and workmanship. Such warranty is made only to those who purchase these products directly from Armortex. Armortex products are designed for installation by persons having requisite skill and knowledge and at their own discretion and risk. Liability under this warranty is limited to either replacement of product, excluding cost of installation, or at Armortex’s option to refund Armortex’s invoice price. In as much as Armortex has no control over the use to which others may put any material or product, it does not guarantee that the same results as those described in catalogue and or drawings will be obtained. Each user of the material or designer or both should make his own tests to determine the suitability of the material for his own particular uses. ARMORTEX® is a registered trademark. As built drawings, operation manual, and spare parts data are not applicable to our products.

US REGIONS/COUNTRIES AVAILABLE