GLOBAL GRAB

SW1900 Wedge

Global GRAB Technologies, Inc. offers an innovative wedge barrier that eliminates many of the challenges experienced during the procurement, installation, use and maintenance of traditional systems. Available in either Hydraulic or Electro-Mechanical models that utilize the same as-tested barrier structure, the SW1900 wedge provides ASTM 2656-07 M50/P1 (15,000 lb truck at 50 mph, penetration less than 3.31') rated protection suitable for a wide variety of facilities. Following independent third-party testing, the test vehicle’s crash-test wreckage was removed, and the SW1900 was immediately cycled multiple times under its own power demonstrating that the SW1900 could withstand an impact and remain functional.

SAVE FOR LATER ADD TO COMPARE
FEATURES
Product Type

Active
Anti-Ram Rating

ASTM F2656 M50 P1
Penetration distance

Up to 3.31 ft
Barrier Type

Wedge
Operator Type

Hydraulic,Electric
Normal Operating Speeds

2 sec
Emergency Fast Operation Speed

Up to 2 sec
Maximum Cycles per Hour

200 cycles
Minimum/Maximum Operating Temperatures range

-40 - 140 ℉
Foundation Depth

18 in
Foundation Type

Continuous
Tested or Analyzed

Tested
Tested or Analyzed Configuration

9' Wedge, 16' Wedge
Environmental Conditions

Marine,Sand,Heavy Rains,Heavy Snow,Corrosive (e.g.chemical plants)
Active Width

9 - 16 ft
On Department of State/Defense Certified List

Yes
SAFETY Act Certified

Designated
Estimated Lead Time (does not include shipping)

8 - 12 week(s)
Certified/Trained Installers Available

Yes
Warranty
1 year
Global GRAB provides a standard 1 year warranty for parts and labor.
US REGIONS/COUNTRIES AVAILABLE
  • Worldwide
DOWNLOADS
Documentation
Brochure Files
Global_GRAB_SW1900_Wedge_Brochure.pdf
4.71 MB
download Download
Specification files
Global_GRAB_SW1900_Wedge_Specification.pdf
211.97 KB
download Download
Certification files
Global_GRAB_SW1900_Wedge_9ft_Certification.pdf
818.11 KB
download Download
Global_GRAB_SW1900_Wedge_16ft_Certification.pdf
15.86 MB
download Download
Drawing files
Global_GRAB_SW1900_Wedge_Drawing.pdf
501.67 KB
download Download
None
arrow
arrow