ARMORTEX

Wood Door - Slim Lite

Bullet Resistant Wood Veneered door and hollow metal frame assemblies are designed for “non-ricochet type” intended to permit capture and retention of attacking projectile, lessening the potential of random injury or lateral penetration. The frame is built with cold rolled steel prime painted steel which is cut, then broken, and welded to size. Frames include armor installed in 2″ face to meet ballistic protection level. Our doors have fiberglass armor core with particle board and are veneer including door skins and edge molding. Ballistic level 1 thru 3 are 1 3/4″ thick and ballistic level 4 through 8 are 2″ + thick. Our wood door assembly leaves the factory swinging on its frame using heavy duty clear anodized aluminum continuous gear hinge prepped for cylinder, mortise lockset, or exit device.

SAVE FOR LATER ADD TO COMPARE
FEATURES
Door Types

Single Leaf
Door Configurations

Narrow Lite
Door Options

Gun Ports
Operation Types

Manual
Threat Type - Ballistics (UL 752)

UL 752 Level 1,UL 752 Level 2,UL 752 Level 3,UL 752 Level 4,UL 752 Level 5,UL 752 Level 6,UL 752 Level 7,UL 752 Level 8
Threat Type - Forced Entry (UL 972)

No
Threat Type - Hurricane/Impact

No
Threat Type - Tornado (ICC 500)

No
Frame Material

Steel
Door Opening Width

32 - 48 in
Door Opening Height

80 - 108 in
Estimated Lead Time (does not include shipping)

10 - 12 week(s)
Certified/Trained Installers Available

No
Warranty
1 year
Armortex warrants its ARMORTEX products for a period of twelve months (1 year) from date of shipment against defects in materials and workmanship. Such warranty is made only to those who purchase these products directly from Armortex. Armortex products are designed for installation by persons having requisite skill and knowledge and at their own discretion and risk. Liability under this warranty is limited to either replacement of product, excluding cost of installation, or at Armortex’s option to refund Armortex’s invoice price. In as much as Armortex has no control over the use to which others may put any material or product, it does not guarantee that the same results as those described in catalogue and or drawings will be obtained. Each user of the material or designer or both should make his own tests to determine the suitability of the material for his own particular uses. ARMORTEX® is a registered trademark. As built drawings, operation manual, and spare parts data are not applicable to our products.
US REGIONS/COUNTRIES AVAILABLE
  • United States of America
DOWNLOADS
Documentation
Specification files
Armortex_BR_Wood_Door_Slim_Lite_Specification.docx
29.26 KB
download Download
Installation files
Armortex_BR_Wood_Door_Slim_Lite_Installation.pdf
435.75 KB
download Download
Drawing files
Armortex_BR_Wood_Door_Slim_Lite_Drawing.pdf
174.47 KB
download Download
Armortex_BR_Wood_Door_Slim_Lite_Drawing.dwg
317.54 KB
download Download
None
None
arrow
arrow